Mazda 6 2020 Brake pad replace with EPB (Electronic Parking Brake)

Mazda 6 2020 Brake pad replace

This is the procedure to get back the cylinder back and repalce the the brake pad, In normal hand brake this procesure is not required, This procedure is only fot the EPB (Electronic Parking Brake)

Method with Smart Key

1. Switch on by pressing the push button twice
2. Just Ignition do not press brake during ignition on
3. If parking brake is not applied apply parking brake by holding up the EPB buttin near the gear liver
4. Turn off the switch
5. Now again press the push button twice to ignition on
6. press and hold the brake pedal and release the parking brake by pressing the EPB button down and dold it untill EPB more stop the running noise
7. Now press accelerator pedal fully and hold
8. While holding the accelerator pedal press and hold the EPB button with one hand
9. Within 5 seconds Press the Push button 3 time ( first push will off the switch, 2nd will on the half switch and 3rd will on the full switch
10. As switch on release the accelerator pedal and the EPB button, Brake pad motors will run and release the brake pad
11. After replease the brake pad perform this step again but During this process you should need to hold the EPB button up for holding the brake pad

For more information and updates, stay tuned to our blog.